RCB瀝青保溫泵分為普通與鑄鋼兩種材質，均(jun1)帶有保溫夾套，保溫泵适用于常溫下有凝固性或結晶而通過加溫并保持一定溫度又容易流動且有潤滑性的液體，以及高寒地區室外安裝和工藝過程中需要保溫的(de)場合，泵開始工作時首先預熱降低了泵的起動功率。适用于輸送有腐蝕性或無腐蝕性、衛生條件要求較高的液體，輸送介質不含固體顆粒，溫度不高于350℃，粘度為5cSt——1500cSt的液體，如各種化工原料、灌裝醫藥、食品、化妝品、農藥、洗滌劑、印染、釀造、樹脂、膠類等行業。該泵傳動方式有電機直聯和減速機兩種，當液體粘度超過1500cSt時，應采用減速機傳動。RCB asphalt heat pump can be divided into ordinary and cast steel material, with thermal insulation jacket, heat pump under applicable interesting coagulability and crystallization and by heating and maintain a certain temperature and easy flow and lubricity of liquid, in the process of the high altitude and outdoor installation process and need to heat preservation, pump starts to work when the first preheating reduced the starting power of the pump.Applicable to transport corrosive or non-corrosive, health conditions to demand higher liquid, medium not containing solid particles, the temperature is not higher than 350 ℃, the viscosity of liquid for 5 CST - 1500 CST, such as filling a variety of chemical raw materials, pharmaceutical, food, cosmetics, pesticide, detergent, printing and dyeing, brewing, resin, rubber and other industries.The pump drive way has two kinds of motor and deceleration machine, when more than 1500 CST liquid viscosity reducer drive should be adopted.

    瀝青保溫泵的泵體設有空心夾層，并設有進出口法蘭，可用于導熱油、蒸氣、熱水、等媒體對輸送的液體和泵進行加熱保溫及冷卻該泵傳動方式有電機直聯和減速機兩種，當液體粘度超過1500cSt時，應采用減速機傳動。

Asphalt heat pump pump body has a hollow interlayer, with import and export of flange, can be used in the thermal oil, steam, hot water, such as the media for the transportation of liquid and pump heat insulation and cooling ways there are to the pump drive motor and deceleration machine two, when more than 1500 CST liquid viscosity reducer drive should be adopted.

瀝青保溫齒輪泵結構形式：Asphalt insulation gear pump structure:

　　泵體設有空心夾層，并設有進出口法蘭，可用于導熱油、蒸氣、熱水等媒體對輸送的液體和泵進行加熱保溫及冷卻。

Pump body has a hollow sandwich, with import and export of flange, can be used in the thermal oil, steam, hot water and other media for conveying liquid and heat insulation and cooling pump.

适用範圍：Scope of application:

　　适用于輸送無腐蝕性、不含固體顆粒、在常溫下有凝固性的介質，尤其适用于高寒地區室外安裝和工藝過程中介質需要保溫的場合，介質溫度可達250℃、粘度為5-1500cst。

Is applicable to transport non-corrosive, not containing solid particles, at room temperature with coagulability medium, especially in cold area outdoor media need to heat preservation in the process of installation and process, medium temperature can reach 250 ℃, the viscosity of 5 to 1500 CST.

用途說明：

　　為輸送常溫下變稠，凝固或結晶而維持一定溫度又容易流動的(de)介質而設計的，如瀝青、石蠟、松香及性質類似的液體，溫度不高于200℃。

Purpose:

For transport has thickened under normal temperature, solidification or crystallization and maintain a certain temperature and easy flow of medium, such as asphalt, paraffin wax, rosin and properties similar liquid, the temperature is not higher than 200 ℃.